Fast Response Insulated Radial Leaded Thin Film NTC Thermistor 100K 3950 50mm 75mm
Description Of The NTC Thermistor 100K 3950
MF55 series is a thin film type thermistor, NTC one chip is soldered on a thin lead frame, and then encapsulated with insulating polymer film. The maximum thickness is only 0.6mm (usually 0.5mm). Thin-film thermistors can measure surface temperature more efficiently, or can be installed within a tiny gap.
Typical Application Of The NTC Thermistor 100K 3950
· Copies, printers, office appliances, inverter fans, mobile power supplies.
· Fire alarm system, grain depot storage system, aluminum electric control panel.
· Battery protection board
. Car circuits, car brake systems, flow meters and other occasions where the space is small and the temperature is high, or the response time is short.
· Thermometer, lithium battery temperature protection.
Main Features Of The NTC Thermistor 100K 3950
* Excellent surface temperature measurement
* Very small thermal time constant
* Small size, fast response, high test accuracy
* Good interchangeability and consistency
* Operating temperature: -40～125℃
* Standard R25 values are 5kohms,10kohms,50kohms and 100kohms with lengths of 11mm.15mm,20mm,25mm, 36mm,44mm.45mm,50mm, and 75mm .
Standard Specification Of The NTC Thermistor 100K 3950
| Part Number | Norminal Resistance | B Value(K) | Operating temperature |
| R25 (KΩ) | Tolerance | (25/50℃) | (25/85℃) | Tolerance | (℃) |
| MF55□502□3270A | 5 | ±1％ ±2％ ±3％ ±5％ | 3270 | | ±1％ ±2％ ±3％ ±5％ | -50～125 |
| MF55□502□3470A | 5 | 3470 | |
| MF55□103□3380A | 10 | 3380 | |
| MF55□103□3435B | 10 | | 3435 |
| MF55□103□3470B | 10 | | 3470 |
| MF55□103□3950A | 10 | 3950 | |
| MF55□103□3975B | 10 | | 3975 |
| MF55□203□3950A | 20 | 3950 | |
| MF55□303□3950A | 30 | 3950 | |
| MF55□473□3950A | 47 | 3950 | |
| MF55□503□3950A | 50 | 3950 | |
| MF55□104□3950A | 100 | 3950 | |
Notes:
1). Do not bend the resistance wire frame at will to avoid the chip and wire frame falling off and causing poor resistance;
2). The temperature should not exceed 300℃ during welding, and the welding time should not exceed 0.5 seconds;
3). Use a hot air gun when shrinking the sleeve, and the temperature of the air gun should be controlled at about 120℃;
4). Use a constant-temperature soldering iron when soldering, with a flat soldering iron tip, holding the resistor in one hand and the wire in the other for butt welding, which can improve production efficiency and shorten welding time;
5). Special Note: Do not touch the chip (ie the top of the resistor) with your hands!
6). Custom made is available
Dimension Of The NTC Thermistor 100K 3950 (mm)
| Total Length= 11mm 
|
| Total length=15mm 
|
| Total length=20mm 
|
| Total length=20mm(Width=3.6mm) 
|
| Total length=20mm(Width=4.5mm) 
|
| Total length=36mm 
|
| Total length=44mm 
|
| Total length=45mm 
|
| Total length=50mm 
|
| Total length=75mm 
|
ROHS & REACH Certification
Related Products Of The NTC Thermistor 100K 3950
Product Tags:
|
|
Fast Response Insulated Radial Leaded Thin Film NTC Thermistor 100K 3950 50mm 75mm Images
|
